Characterization of a new strain of Metarhizium novozealandicum with potential to be developed as a biopesticide.

The fungal species Metarhizium novozealandicum, that occurs only in New Zealand and Australia has been poorly studied.  In this work, a new strain of M. novozealandicum isolated from a larva of Wiseana sp. is described based on morphology, genomic multilocus (ITS, EF-1α and ß-tubulin) phylogeny, growth in different culture media and insecticidal activity. The isolate AgR-F177 was clustered in the same clade with M. novozealandicum. AgR-F177 colonies developed faster on Sabouraud Dextrose Agar (SDA) than on Potato Dextrose Agar (PDA) when incubated at 25°C, with no growth observed at 30°C on either media. Conidia yield on an oat-based medium in semisolid fermentation was 7.41 x 108conidia/g of substrate and a higher yield of 1.68 x 109conidia/g of substrate was obtained using solid fermentation on cooked rice. AgR-F177 formed microsclerotia (MS) in liquid fermentation after 7 days reaching the maximum yield of 3.3 × 103 MS/mL after 10 days. AgR-F177 caused mortality in Wiseana copularis, Costelytra giveni and Plutella xylostella larvae with efficacies up to 100%, 69.2%, and 45.7%, respectively. The ease of production of AgR-F177 with different fermentation systems and its pathogenicity against different insect pests reveal its potential as a new biopesticide.

Can Biological Control Overcome the Threat From Newly Invasive Coconut Rhinoceros Beetle Populations (Coleoptera: Scarabaeidae)? A Review.

The coconut rhinoceros beetle (CRB: Oryctes rhinoceros Linnaeus) is one of the most damaging pests to coconut and oil palms in Asia and the Pacific Islands. Adults bore into the crown and damage developing fronds, which affects tree development and yield. The insect is native to South and Southeast Asia and was inadvertently introduced into the Pacific in 1909. It has since spread to several Pacific island nations and territories, causing significant economic impact on these important coconut and palm-growing regions. In the 1950s and 1960s, an international biological control effort was initiated to search for and release natural enemy species. Release of the Oryctes rhinoceros nudivirus Huger (OrNV) and the species complex of Metarhizium Sorokin (Hypocreales: Clavicipitaceae) was successful in controlling CRB in its invaded range. Recently a new biotype of the beetle, known as CRB-G, has spread into the Pacific Islands causing unprecedented levels of damage due to the failure of previously successful biological control agents (BCAs) to suppress this biotype. The re-emergence of CRB as a serious pest warrants a rigorous re-evaluation of potential BCAs and a new search for effective natural enemies if necessary. In this article, we review literature on CRB to 1) analyze past introductions of BCAs and their effectiveness; 2) identify potentially important natural enemies and their geographical origins; and 3) assess possible approaches for utilization of BCAs against the new wave of CRB invasion. Research gaps and directions deserving future attention are highlighted and a strategy for renovation of biological controls for CRB suggested.

Three-dimensional cellular aggregates formed by Beauveria pseudobassiana in liquid culture with potential for use as a biocontrol agent of the African black beetle (Heteronychus arator).

Beauveria pseudobassiana formed three-dimensional aggregates of cells (CAs) in liquid culture. CAs were formed mainly by blastospores and conidia, distinct from microsclerotia formed through adhesion of hyphae. The formation, germination and sporulation of CAs were studied, as well as the pathogenicity of conidia produced from them against adults of black beetle. After 4 days of culture, CAs were formed, becoming compact and melanised after 10 days of incubation. Electron microscopy showed three-dimensional CAs averaging 431.65 µm in length with irregular shapes and rough surfaces, where cells were trapped within an extracellular matrix. CAs germinated after 2 days of incubation on agar-plates producing hyphae and forming phialides and conidia after 4 days. Produced conidia caused 45% mortality of black beetle adults. CAs germination and sporulation on soil were directly correlated with soil moisture, reaching 80% and 100% germination on the surface of soil with 17% and 30% moisture, respectively. CAs maintained 100% germination after 2 years of storage under refrigeration. These CAs could have a similar function as microsclerotia in nature, acting as resistant structures able to protect internal cells and their ability to sporulate producing infective conidia, suggesting their potential to be used as bioinsecticides to control soil-dwelling insects.

Novel biopesticide based on Erinnyis ello betabaculovirus: characterization and preliminary field evaluation to control Erinnyis ello in rubber plantations.

BACKGROUND: The hornworn Erinnyis ello is the major pest of natural rubber crops in Colombia, mainly controlled using toxic chemical insecticides. The use of E. ello Betabaculovirus is an environmentally sustainable alternative for its control. The aim of the present work was to characterize a prototype biopesticide formulation and evaluate its efficacy under different conditions. RESULTS: Quality control evaluations of formulated biopesticide revealed that all the parameters evaluated were under the permissible level. The lethal concentrations LC50 and LC90 of the biopesticide were 4.3 × 103 and 5.5 × 104 occlusion bodies (OBs) mL-1 , respectively. Biopesticide efficacies against second and fourth instar larvae under greenhouse conditions were higher than 80%. Evaluation of two application rates in a clonal garden resulted in 84% and 88% efficacy, comparable to that obtained with the chemical. The biopesticide in a commercial plantation showed efficacies between 74% and 82%. Biopesticide post-application persistence was estimated at least in 1 week under field natural conditions. Results allowed selection of the lowest evaluated dose (1 × 1011 OBs ha-1 ) as the basis for further field evaluations. CONCLUSION: Formulated ErelGV showed high efficacy to control the hornworm in rubber crops and high potential to be included in integrated pest management programs, thus it could be an interesting alternative to replace agrochemicals. © 2018 Society of Chemical Industry.

The complete sequence of the first Spodoptera frugiperda Betabaculovirus genome: a natural multiple recombinant virus.

Spodoptera frugiperda (Lepidoptera: Noctuidae) is a major pest in maize crops in Colombia, and affects several regions in America. A granulovirus isolated from S. frugiperda (SfGV VG008) has potential as an enhancer of insecticidal activity of previously described nucleopolyhedrovirus from the same insect species (SfMNPV). The SfGV VG008 genome was sequenced and analyzed showing circular double stranded DNA of 140,913 bp encoding 146 putative ORFs that include 37 Baculoviridae core genes, 88 shared with betabaculoviruses, two shared only with betabaculoviruses from Noctuide insects, two shared with alphabaculoviruses, three copies of own genes (paralogs) and the other 14 corresponding to unique genes without representation in the other baculovirus species. Particularly, the genome encodes for important virulence factors such as 4 chitinases and 2 enhancins. The sequence analysis revealed the existence of eight homologous regions (hrs) and also suggests processes of gene acquisition by horizontal transfer including the SfGV VG008 ORFs 046/047 (paralogs), 059, 089 and 099. The bioinformatics evidence indicates that the genome donors of mentioned genes could be alpha- and/or betabaculovirus species. The previous reported ability of SfGV VG008 to naturally co-infect the same host with other virus show a possible mechanism to capture genes and thus improve its fitness.

Estudio fisicoqíímico de la solubilidad del eudagit s100® en algunos medios accuosos y orgánicos / Physicochemicalsstudy of the solubility of eudragit s100® in some aqueous and organic systems / Esudo físico-quíímco da solubilidade de eudragit s100® em alguns sistemas aqueus e orânnicos

En este trabajo se estudió la solubilidad del Eudragit S100® respecto al pH en medios acuosos y a la polaridad en solventes orgánicos. Además, se estimó el parámetro de solubilidad del polímero [1], de forma experimental y teórica, mediante los métodos de contribución de grupos de Fedors y de van Krevelen, estableciendo su mapa de solubilidad. Los resultados mostraron que la solubilidad del polímero depende del pH siendo soluble a partir de pH 6,0. El valor [1] estimado experimentalmente fue de 12,9 [1] 2,4 cal1/2 cm-3/2 siendo casi concordante con los obtenidos mediante los métodos de Fedors y de van Krevelen. Adicionalmente, se construyó el diagrama de Teas para la identificación de solventes y no solventes para el polímero.

In this paper the solubility of Eudragit S100® was studied with respect to pH in aqueous media and with respect to the polarity of some organic solvents. The polymer solubility parameter [1], was established by means of experimental solubility determinations and by theoretical ways, by using the Fedors and van Krevelen methods, which are based on groups’ contribution. The respective solubility map was thus established. The results show that the polymer is soluble in water over pH 6.0. The [1] value obtained experimentally was 12.9 [1] 2.4 cal1/2 cm-3/2, which is almost concordant with those obtained by means of Fedors and van Krevelen’s methods. In turn, the Teas diagram was developed for identifying the solvents and non-solvents for this polymer.

Neste papel o solubilidade de Eudragit S100® foi estudado com respeito ao pH em meios aqueus e com respeito à polaridade de alguns solventes orgânicos. O parâmetro da solubilidade ( ) do polímero foi estabelecido por meio das determinações experimentais da solubilidade e por maneiras teóricas, usando os métodos de Fedors e de van Krevelen, que são baseados na contribuição dos grupos funcionais. O mapa respectivo da solubilidade foi estabelecido assim. Os resultados mostram que o polímero é solúvel na água a pH maior que 6,0. O valor obtido experimentalmente foram 12,9 [1] 2,4 cal1/2 cm-3/2, que é quase concordante com os aqueles obtidos por meio de métodos de Fedors e de van Krevelen. Por sua vez, o diagrama dos Teas foi desenvolvido identificando os solventes e os não solventes para este polímero.